Differences between revisions 3 and 36 (spanning 33 versions)
⇤ ← Revision 3 as of 2017-10-12 22:54:27 →
Size: 1042
Editor: shran
Comment:
← Revision 36 as of 2021-12-31 12:57:55 → ⇥
Size: 3792
Editor: Kristian Kallenberg
Comment:
Deletions are marked like this. Additions are marked like this.
Line 2: Line 2:
Once a template system has been installed, that system can be cloned. `virt-clone` will automatically change the MAC address of your network device.
Line 3: Line 4:
Once a template system has been installed, that system can be cloned. Use the following script to clone your template == Cloning ==
Use the script below to clone your template.
Line 5: Line 7:
`clonedomain.sh` `domain_clone_bullseye.sh`
Line 8: Line 10:
LVM_GROUP="vg2"
NAME_ORIGINAL="stretch-template"
LVM_NAME_ORIGINAL="kvm_${NAME_ORIGINAL}_vda"
LVM_SIZE_ORIGINAL=`lvs /dev/${LVM_GROUP}/${LVM_NAME_ORIGINAL} -o LV_SIZE --noheadings --units B --nosuffix`
NAME_CLONE="stretch-clone"
LVM_NAME_CLONE="kvm_${NAME_CLONE}_vda"
Line 15: Line 11:
if [ $# -eq 0 ] SRC_VOLUME_GROUP="vg_storage"
DST_VOLUME_GROUP="vg_storage"
SRC_NAME="bullseye-template"
SRC_VOLUME="kvm_${SRC_NAME}_vda"
SRC_VOLUME_SIZE=`lvs /dev/${SRC_VOLUME_GROUP}/${SRC_VOLUME} -o LV_SIZE --noheadings --units B --nosuffix`
DST_NAME="bullseye-clone"
DST_VOLUME="kvm_${DST_NAME}_vda"
DST_MEMORY="256M"
MOUNTPOINT="/mnt/domain_root"
MAC=""

if [ ! -e /sbin/kpartx ]
Line 17: Line 24:
        echo "${0}: domain-name"
else
        NAME_CLONE=${1}
        LVM_NAME_CLONE="kvm_${NAME_CLONE}_vda"		  apt-get install -y kpartx
Line 23: Line 27:
if [ ! -e /dev/${LVM_GROUP}/${LVM_NAME_CLONE} ] if [ $# -gt 0 ]
Line 25: Line 29:
        # create lvm partition
        lvcreate --size ${LVM_SIZE_ORIGINAL}B --name ${LVM_NAME_CLONE} ${LVM_GROUP}

        # clone the domain
        virt-clone --original ${NAME_ORIGINAL} --name ${NAME_CLONE} --file /dev/${LVM_GROUP}/${LVM_NAME_CLONE} --check path_in_use=off,path_exists=off
else
        echo "${0}: refusing to overwrite existing domain"		  DST_NAME=${1}
 DST_VOLUME="kvm_${DST_NAME}_vda"
Line 34: Line 33:
if [ "${2}" != "" ]
then
 MAC="--mac ${2} "
else
        MAC=$(grep ${DST_NAME} /root/scripts/mac | awk -F "\t" {'print $1'})
        MAC="--mac ${MAC}"
fi

if [ ! -e /dev/${DST_VOLUME_GROUP}/${DST_VOLUME} ]
then
 # create lvm partition
 lvcreate --yes --size ${SRC_VOLUME_SIZE}B --name ${DST_VOLUME} ${DST_VOLUME_GROUP}

 # clone the domain
 virt-clone \
  --original ${SRC_NAME} \
  --name ${DST_NAME} \
  --file /dev/${DST_VOLUME_GROUP}/${DST_VOLUME} \
  ${MAC} \
  --check path_in_use=off,path_exists=off

 # mount the domains / partition
 OFFSET=`kpartx /dev/${DST_VOLUME_GROUP}/${DST_VOLUME} | tail -n1|awk {'print $6'}`
 OFFSET_BYTES="$((${OFFSET} * 512))"
 losetup -o ${OFFSET_BYTES} /dev/loop0 /dev/${DST_VOLUME_GROUP}/${DST_VOLUME}
 pvscan
 vgscan
 vgchange -ay vg_os
 if [ ! -e ${MOUNTPOINT} ]
 then
  mkdir -p ${MOUNTPOINT}
 fi
 mount -o subvol=@rootfs /dev/vg_os/root ${MOUNTPOINT}
 # manipulate domain
 mkdir ${MOUNTPOINT}/root/scripts
 cp /root/scripts/guest_cleanup.sh ${MOUNTPOINT}/root/scripts
 # hostname
 cp ${MOUNTPOINT}/etc/hosts ${MOUNTPOINT}/etc/hosts.kk
 sed -i "s/${SRC_NAME}/${DST_NAME}/g" ${MOUNTPOINT}/etc/hosts
 cp ${MOUNTPOINT}/etc/hostname ${MOUNTPOINT}/etc/hostname.kk
 sed -i "s/${SRC_NAME}/${DST_NAME}/g" ${MOUNTPOINT}/etc/hostname

 # rc.local
 echo "#!/bin/sh" > ${MOUNTPOINT}/etc/rc.local
 # this delay is needed for the network to settle, works with 32, but using 64 to be sure
 #echo "sleep 64" >> ${MOUNTPOINT}/etc/rc.local
 echo "/root/scripts/guest_cleanup.sh ${DST_NAME}" >> ${MOUNTPOINT}/etc/rc.local
 echo "rm /etc/rc.local" >> ${MOUNTPOINT}/etc/rc.local
 echo "shutdown -h 0" >> ${MOUNTPOINT}/etc/rc.local
 echo "exit 0" >> ${MOUNTPOINT}/etc/rc.local
 chmod +x ${MOUNTPOINT}/etc/rc.local
 # ssh keys
 mkdir ${MOUNTPOINT}/root/.ssh
 cat /root/scripts/login_id_rsa.pub >> ${MOUNTPOINT}/root/.ssh/authorized_keys
 mkdir ${MOUNTPOINT}/home/kale/.ssh
 cat /root/scripts/login_id_rsa.pub >> ${MOUNTPOINT}/home/kale/.ssh/authorized_keys
 chown -R kale:kale ${MOUNTPOINT}/home/kale/
 # unmount and cleanup
 umount ${MOUNTPOINT}
 vgchange -an vg_os
 losetup -d /dev/loop0
 # cleanup domain
 virt-xml ${DST_NAME} --edit --graphics password=${DST_NAME}
 #virt-xml ${DST_NAME} --remove-device --graphics all
 virsh setmaxmem ${DST_NAME} --size ${DST_MEMORY} --config
 virsh setmem ${DST_NAME} --size ${DST_MEMORY} --config
 virsh start ${DST_NAME}
else
 echo "${0}: refusing to overwrite existing domain"
fi
Line 35: Line 104:

Make a clone.
{{{
./domain_clone_bullseye.sh clone
}}}

== Memory ==
Increase or decrease amount of memory by [[Domain Editing|editing the domain]].

== Network ==
For your convenience add the MAC address to the DHCP servers list of fixed IP-adresses before starting the system for the first time. This way you know beforehand which IP-address to connect to.

== Guest OS ==
Continue by configuring the [[KVM Guest Operating System|KVM Guest Operating System]].

Domain Cloning

Once a template system has been installed, that system can be cloned. virt-clone will automatically change the MAC address of your network device.

Cloning

Use the script below to clone your template.

domain_clone_bullseye.sh 

   1 #!/bin/sh
   2 
   3 SRC_VOLUME_GROUP="vg_storage"
   4 DST_VOLUME_GROUP="vg_storage"
   5 SRC_NAME="bullseye-template"
   6 SRC_VOLUME="kvm_${SRC_NAME}_vda"
   7 SRC_VOLUME_SIZE=`lvs /dev/${SRC_VOLUME_GROUP}/${SRC_VOLUME} -o LV_SIZE --noheadings --units B --nosuffix`
   8 DST_NAME="bullseye-clone"
   9 DST_VOLUME="kvm_${DST_NAME}_vda"
  10 DST_MEMORY="256M"
  11 MOUNTPOINT="/mnt/domain_root"
  12 MAC=""
  13 
  14 if [ ! -e /sbin/kpartx ]
  15 then
  16         apt-get install -y kpartx
  17 fi
  18 
  19 if [ $# -gt 0 ]
  20 then
  21         DST_NAME=${1}
  22         DST_VOLUME="kvm_${DST_NAME}_vda"
  23 fi
  24 
  25 if [ "${2}" != "" ]
  26 then
  27         MAC="--mac ${2} "
  28 else
  29         MAC=$(grep ${DST_NAME} /root/scripts/mac | awk -F "\t" {'print $1'})
  30         MAC="--mac ${MAC}"
  31 fi
  32 
  33 if [ ! -e /dev/${DST_VOLUME_GROUP}/${DST_VOLUME} ]
  34 then
  35         # create lvm partition
  36         lvcreate --yes --size ${SRC_VOLUME_SIZE}B --name ${DST_VOLUME} ${DST_VOLUME_GROUP}
  37 
  38         # clone the domain
  39         virt-clone \
  40                 --original ${SRC_NAME} \
  41                 --name ${DST_NAME} \
  42                 --file /dev/${DST_VOLUME_GROUP}/${DST_VOLUME} \
  43                 ${MAC} \
  44                 --check path_in_use=off,path_exists=off
  45 
  46         # mount the domains / partition
  47         OFFSET=`kpartx /dev/${DST_VOLUME_GROUP}/${DST_VOLUME} | tail -n1|awk {'print $6'}`
  48         OFFSET_BYTES="$((${OFFSET} * 512))"
  49         losetup -o ${OFFSET_BYTES} /dev/loop0 /dev/${DST_VOLUME_GROUP}/${DST_VOLUME}
  50         pvscan
  51         vgscan
  52         vgchange -ay vg_os
  53         if [ ! -e ${MOUNTPOINT} ]
  54         then
  55                 mkdir -p ${MOUNTPOINT}
  56         fi
  57         mount -o subvol=@rootfs /dev/vg_os/root ${MOUNTPOINT}
  58         # manipulate domain
  59         mkdir ${MOUNTPOINT}/root/scripts
  60         cp /root/scripts/guest_cleanup.sh ${MOUNTPOINT}/root/scripts
  61         # hostname
  62         cp ${MOUNTPOINT}/etc/hosts ${MOUNTPOINT}/etc/hosts.kk
  63         sed -i "s/${SRC_NAME}/${DST_NAME}/g" ${MOUNTPOINT}/etc/hosts
  64         cp ${MOUNTPOINT}/etc/hostname ${MOUNTPOINT}/etc/hostname.kk
  65         sed -i "s/${SRC_NAME}/${DST_NAME}/g" ${MOUNTPOINT}/etc/hostname
  66 
  67         # rc.local
  68         echo "#!/bin/sh" > ${MOUNTPOINT}/etc/rc.local
  69         # this delay is needed for the network to settle, works with 32, but using 64 to be sure
  70         #echo "sleep 64" >> ${MOUNTPOINT}/etc/rc.local
  71         echo "/root/scripts/guest_cleanup.sh ${DST_NAME}" >> ${MOUNTPOINT}/etc/rc.local
  72         echo "rm /etc/rc.local" >> ${MOUNTPOINT}/etc/rc.local
  73         echo "shutdown -h 0" >> ${MOUNTPOINT}/etc/rc.local
  74         echo "exit 0" >> ${MOUNTPOINT}/etc/rc.local
  75         chmod +x ${MOUNTPOINT}/etc/rc.local
  76         # ssh keys
  77         mkdir ${MOUNTPOINT}/root/.ssh
  78         cat /root/scripts/login_id_rsa.pub >> ${MOUNTPOINT}/root/.ssh/authorized_keys
  79         mkdir ${MOUNTPOINT}/home/kale/.ssh
  80         cat /root/scripts/login_id_rsa.pub >> ${MOUNTPOINT}/home/kale/.ssh/authorized_keys
  81         chown -R kale:kale ${MOUNTPOINT}/home/kale/
  82         # unmount and cleanup
  83         umount ${MOUNTPOINT}
  84         vgchange -an vg_os
  85         losetup -d /dev/loop0
  86         # cleanup domain
  87         virt-xml ${DST_NAME} --edit --graphics password=${DST_NAME}
  88         #virt-xml ${DST_NAME} --remove-device --graphics all
  89         virsh setmaxmem ${DST_NAME} --size ${DST_MEMORY} --config
  90         virsh setmem ${DST_NAME} --size ${DST_MEMORY} --config
  91         virsh start ${DST_NAME}
  92 else
  93         echo "${0}: refusing to overwrite existing domain"
  94 fi

Make a clone. 

./domain_clone_bullseye.sh clone

Memory

Increase or decrease amount of memory by editing the domain.

Network

For your convenience add the MAC address to the DHCP servers list of fixed IP-adresses before starting the system for the first time. This way you know beforehand which IP-address to connect to.

Guest OS

Continue by configuring the KVM Guest Operating System.

None: Domain Cloning (last edited 2021-12-31 14:57:50 by Kristian Kallenberg)