Differences between revisions 8 and 10 (spanning 2 versions)
Revision 8 as of 2017-12-10 23:33:21
Size: 762
Comment:
Revision 10 as of 2017-12-10 23:36:39
Size: 1061
Comment:
Deletions are marked like this. Additions are marked like this.
Line 22: Line 22:
Before installing the DHCP server, make sure that you do not have toher DHCP servers running on your network. I can cause hours of debugging, both the newly installed server, but also people asking why the DNS is not updated.
Line 23: Line 24:
Install the DHCP server.
Line 27: Line 29:
== Configure the server ==
Line 28: Line 32:
Line 33: Line 36:
== Configure the server ==

Edit `/etc/default/isc-dhcp-server` and set the following value
=== Choose Network Deevice ===
Edit `/etc/default/isc-dhcp-server` and set the dhcp server to run on `eth0`.
Line 40: Line 42:
=== Stop the server === === Start the server ===
Line 43: Line 45:
service isc-dhcp-server stop service isc-dhcp-server start

DHCP Primary

Network

We will give the DHCP primary a static IP-address. Edit /etc/networking/interfaces and make the following changes.

# The primary network interface
#allow-hotplug eth0
#iface eth0 inet dhcp

auto eth0
iface eth0 inet static
        address 192.168.1.36
        network 192.168.1.0
        netmask 255.255.255.0
        broadcast 192.168.1.255
        gateway 192.168.1.1

Software

Before installing the DHCP server, make sure that you do not have toher DHCP servers running on your network. I can cause hours of debugging, both the newly installed server, but also people asking why the DNS is not updated.

Install the DHCP server.

apt-get install isc-dhcp-server

Configure the server

Stop the server

service isc-dhcp-server stop

Choose Network Deevice

Edit /etc/default/isc-dhcp-server and set the dhcp server to run on eth0.

INTERFACESv4="eth0"

Start the server

service isc-dhcp-server start

None: DHCP Primary (last edited 2021-03-15 21:24:19 by Kristian Kallenberg)