Differences between revisions 19 and 55 (spanning 36 versions)

Corosync and HA-proxy

We will use corosync to create a virtual IP-address which is shared by two systems. One of the systems has the virtual IP-address. If the system goes down, the other system will take over the virtual IP-address. HA-proxy will be running on each of the hosts relaying incoming HTTP-requests to two webservers.

192.168.1.49 www (virtual IP-address)
192.168.1.50 haproxy01
192.168.1.51 haproxy02

Software

apt-get install corosync haproxy crmsh

Configuration

Before binding to the DNS name www make sure the DNS server knows that name. There is no physical or virtual network interfaces, so the DNS updates has to be done manually.

Corosync

Encryption

Edit /etc/corosync/corosync.conf and make the following changes.

totem {
        cluster_name: www
        crypto_cipher: aes256
        crypto_hash: sha512
}

Authentication Key

Generate the authkey. Note that this requires entropy, so use your system and the entropy will be generated. Speed this up by running dd if=/dev/vda of=/dev/null in another terminal.

corosync-keygen

Network

Add the local network and a multicast address to /etc/corosync/corosync.conf in the interface section.

interface {
        bindnetaddr: 192.168.1.0 
        mcastaddr: 239.192.1.1
}

Copy the configuration /etc/corosync/corosync.conf and the authkey /etc/corosync/authkey to the other host.

Restart corosync on both hosts to load the new configuration.

service corosync restart

The two nodes should now be configured to see each other. Run crm status to check.

Stack: corosync
Current DC: haproxy01 (version 1.1.16-94ff4df) - partition with quorum
Last updated: Sat Feb  1 14:41:09 2020
Last change: Sat Feb  1 14:40:51 2020 by hacluster via crmd on haproxy01

2 nodes configured
0 resources configured

Online: [ haproxy01 haproxy02 ]

No resources

HA-proxy

HA-proxy resource script

Download the HA-proxy resource script, place it in /usr/lib/ocf/resource.d/heartbeat/haproxy and make it executeable.

wget https://raw.githubusercontent.com/thisismitch/cluster-agents/master/haproxy -O /usr/lib/ocf/resource.d/heartbeat/haproxy
chmod +x /usr/lib/ocf/resource.d/heartbeat/haproxy

This has to be done on both hosts.

Nodes

Do not kill the other node.

crm configure property stonith-enabled=false

Disable quorum due to two nodes only. This will make sure that the cluster keeps running if only one node is up.

crm configure property no-quorum-policy=ignore

Configure shared IP-address.

crm configure primitive haproxy_wwwSharedIP ocf:heartbeat:IPaddr2 params ip=192.168.1.49 cidr_netmask=24 op monitor interval=5s

Create heartbeat for haproxy.

crm configure primitive haproxy_wwwLoadBalance ocf:heartbeat:haproxy params conffile=/etc/haproxy/haproxy.cfg op monitor interval=10s

Make sure the same server has both IP and service at the same time.

crm configure group haproxy_www haproxy_wwwSharedIP haproxy_wwwLoadBalance

Create the relation between IP-address and haproxy servers.

currently gives: root@haproxy01:/etc/corosync# crm configure colocation haproxyWithIPs INFINITY: haproxy_wwwLoadBalance haproxy_wwwSharedIP

WARNING: haproxyWithIPs: resource haproxy_wwwLoadBalance is grouped, constraints should apply to the group

WARNING: haproxyWithIPs: resource haproxy_wwwSharedIP is grouped, constraints should apply to the group)

crm configure colocation haproxyWithIPs INFINITY: haproxy_wwwLoadBalance haproxy_wwwSharedIP

IP-address should be up before haproxy starts.

crm configure order haproxyAfterIPs mandatory: haproxy_wwwSharedIP haproxy_wwwLoadBalance

Webfarm

Add the following to /etc/haproxy/haproxy.cfg

listen webfarm 
        bind www:80
        mode http
        balance roundrobin
        cookie LBN insert indirect nocache
        option httpclose
        option forwardfor
        server haproxy01 www01:80 cookie node1 check
        server haproxy02 www02:80 cookie node2 check

Copy the configuration /etc/haproxy/haproxy.cfg to the other host.

Restart HA-proxy on both hosts to load the new configuration.

service haproxy restart

Start over

run this rm /var/lib/heartbeat/crm/cib*

Test it

while true; do wget --quiet http://www/ -O /dev/stdout; sleep 1; done

References

None: Corosync and HA-proxy (last edited 2021-08-12 09:31:08 by Kristian Kallenberg)

-  ⇤ ← Revision 19 as of 2018-01-20 13:35:20 → 
  Size: 3002
  Editor: Kristian Kallenberg
  Comment:
+   ← Revision 55 as of 2020-02-01 13:51:28 → ⇥
  Size: 4815
  Editor: Kristian Kallenberg
  Comment:
-Deletions are marked like this.
+Additions are marked like this.
 Line 1:
-Incomplete, do not use!
-Line 7:
+Line 5:
- * 192.168.1.47 www (virtual IP-address)
 * 192.168.1.48 haproxy01
 * 192.168.1.49 haproxy02
+ * 192.168.1.49 www (virtual IP-address)
 * 192.168.1.50 haproxy01
 * 192.168.1.51 haproxy02
-Line 24:
+Line 22:
-crypto_cipher: aes256
crypto_hash: sha512
+totem {
        cluster_name: www
        crypto_cipher: aes256
        crypto_hash: sha512
}
-Line 28:
+Line 29:
-==== Certificates ====
Generate the certificates. Note that this requires entropy, so use your system and the entropy will be generated.
+==== Authentication Key ====
Generate the authkey. Note that this requires entropy, so use your system and the entropy will be generated. Speed this up by running `dd if=/dev/vda of=/dev/null` in another terminal.
-Line 34:
+Line 35:
-Add the local network and a multicast address to `/etc/corosync/corosync.conf` in the `interface` section
+==== Network ====
Add the local network and a multicast address to `/etc/corosync/corosync.conf` in the `interface` section.
-Line 42:
+Line 43:
+Copy the configuration `/etc/corosync/corosync.conf` and the authkey `/etc/corosync/authkey` to the other host.
-Line 43:
+Line 45:
-Restart corosync to load the new configuration.
+Restart corosync on both hosts to load the new configuration.
-Line 48:
+Line 50:
-== Commmands ==
Run the following on startup
{{{#!highlight bash
# do not kill other node
crm configure property stonith-enabled=false
# disable quorum due to two nodes only
crm configure property no-quorum-policy=ignore
# configure shared IP
crm configure primitive haproxySharedIP  ocf:heartbeat:IPaddr2 params ip=192.168.1.47 cidr_netmask=24 op monitor interval=5s
# create heartbeat for haproxy
crm configure primitive haproxyLoadBalance ocf:heartbeat:haproxy params conffile=/etc/haproxy/haproxy.cfg op monitor interval=10s
+The two nodes should now be configured to see each other. Run `crm status` to check.
{{{
Stack: corosync
Current DC: haproxy01 (version 1.1.16-94ff4df) - partition with quorum
Last updated: Sat Feb  1 14:41:09 2020
Last change: Sat Feb  1 14:40:51 2020 by hacluster via crmd on haproxy01
-Line 60:
+Line 57:
-# make sure the same server has both IP and service
#crm configure group haproxyIPs haproxySharedIP meta ordered=false
crm configure group haproxy haproxySharedIP haproxyLoadBalance
# relation between IP and haproxy servers
crm configure colocation haproxyWithIPs INFINITY: haproxyLoadBalance haproxySharedIP
# IP should be up before haproxy starts
crm configure order haproxyAfterIPs mandatory: haproxySharedIP haproxyLoadBalance 
#wget http://github.com/russki/cluster-agents/raw/master/haproxy
#echo "net.ipv4.ip_nonlocal_bind = 1" >> /etc/sysctl.conf
+nodes configured
0 resources configured
-Line 70:
+Line 60:
+Online: [ haproxy01 haproxy02 ]

No resources
-Line 72:
+Line 65:
+=== HA-proxy ===
-Line 73:
+Line 67:
+==== HA-proxy resource script ====
Download the HA-proxy resource script, place it in `/usr/lib/ocf/resource.d/heartbeat/haproxy` and make it executeable.
{{{
wget https://raw.githubusercontent.com/thisismitch/cluster-agents/master/haproxy -O /usr/lib/ocf/resource.d/heartbeat/haproxy
chmod +x /usr/lib/ocf/resource.d/heartbeat/haproxy
}}}
This has to be done on both hosts.
-Line 74:
+Line 75:
+==== Nodes ====
Do not kill the other node.
{{{
crm configure property stonith-enabled=false
}}}
Disable quorum due to two nodes only. This will make sure that the cluster keeps running if only one node is up.
{{{
crm configure property no-quorum-policy=ignore
}}}
Configure shared IP-address.
{{{
crm configure primitive haproxy_wwwSharedIP ocf:heartbeat:IPaddr2 params ip=192.168.1.49 cidr_netmask=24 op monitor interval=5s
}}}
Create heartbeat for haproxy.
{{{
crm configure primitive haproxy_wwwLoadBalance ocf:heartbeat:haproxy params conffile=/etc/haproxy/haproxy.cfg op monitor interval=10s
}}}
Make sure the same server has both IP and service at the same time.
{{{
crm configure group haproxy_www haproxy_wwwSharedIP haproxy_wwwLoadBalance
}}}
Create the relation between IP-address and haproxy servers.
-Line 75:
+Line 98:
-=== HA-proxy ===
+currently gives:
root@haproxy01:/etc/corosync# crm configure colocation haproxyWithIPs INFINITY: haproxy_wwwLoadBalance haproxy_wwwSharedIP

WARNING: haproxyWithIPs: resource haproxy_wwwLoadBalance is grouped, constraints should apply to the group

WARNING: haproxyWithIPs: resource haproxy_wwwSharedIP is grouped, constraints should apply to the group)

{{{
crm configure colocation haproxyWithIPs INFINITY: haproxy_wwwLoadBalance haproxy_wwwSharedIP
}}}
IP-address should be up before haproxy starts.
{{{
crm configure order haproxyAfterIPs mandatory: haproxy_wwwSharedIP haproxy_wwwLoadBalance
}}}

==== Webfarm ====
-Line 88:
+Line 127:
+Copy the configuration `/etc/haproxy/haproxy.cfg` to the other host.
-Line 89:
+Line 129:
-Restart HA-proxy
+Restart HA-proxy on both hosts to load the new configuration.
-Line 95:
+Line 135:
+==== Start over ====
run this `rm /var/lib/heartbeat/crm/cib*`
-Line 96:
+Line 138:
+== Test it ==
{{{
while true; do wget --quiet http://www/ -O /dev/stdout; sleep 1; done
}}}
-Line 98:
+Line 144:
-  * https://wiki.debian.org/Debian-HA/ClustersFromScratch
+ * https://wiki.debian.org/Debian-HA/ClustersFromScratch
 * https://www.digitalocean.com/community/tutorials/how-to-create-a-high-availability-setup-with-corosync-pacemaker-and-floating-ips-on-ubuntu-14-04