2673
Comment:
|
3121
|
Deletions are marked like this. | Additions are marked like this. |
Line 18: | Line 18: |
=== Corosync === ==== Encryption ==== Edit `/etc/corosync/corosync.conf` and make the following changes. {{{ totem { crypto_cipher: aes256 crypto_hash: sha512 } }}} ==== Certificates ==== Generate the certificates. Note that this requires entropy, so use your system and the entropy will be generated. Speed this up by running `dd if=/dev/vda of=/dev/null` in another terminal. {{{ corosync-keygen }}} ==== Network ==== Add the local network and a multicast address to `/etc/corosync/corosync.conf` in the `interface` section. {{{ interface { bindnetaddr: 192.168.1.0 mcastaddr: 239.192.1.1 } }}} Restart corosync to load the new configuration. {{{ service corosync restart }}} ==== Nodes ==== THIS WORKS Do not kill the other node. {{{ crm configure property stonith-enabled=false }}} THIS HAS TO BE TESTED # disable quorum due to two nodes only crm configure property no-quorum-policy=ignore # configure shared IP crm configure primitive haproxySharedIP ocf:heartbeat:IPaddr2 params ip=192.168.1.47 cidr_netmask=24 op monitor interval=5s # create heartbeat for haproxy crm configure primitive haproxyLoadBalance ocf:heartbeat:haproxy params conffile=/etc/haproxy/haproxy.cfg op monitor interval=10s # make sure the same server has both IP and service #crm configure group haproxyIPs haproxySharedIP meta ordered=false crm configure group haproxy haproxySharedIP haproxyLoadBalance # relation between IP and haproxy servers crm configure colocation haproxyWithIPs INFINITY: haproxyLoadBalance haproxySharedIP # IP should be up before haproxy starts crm configure order haproxyAfterIPs mandatory: haproxySharedIP haproxyLoadBalance #wget http://github.com/russki/cluster-agents/raw/master/haproxy #echo "net.ipv4.ip_nonlocal_bind = 1" >> /etc/sysctl.conf }}} |
|
Line 38: | Line 98: |
=== Corosync === Add the local network and a multicast address to `/etc/corosync/corosync.conf` in the `interface` section {{{ interface { bindnetaddr: 192.168.1.0 mcastaddr: 239.192.1.1 } }}} |
|
Line 47: | Line 99: |
Restart corosync to load the new configuration. {{{ service corosync restart }}} |
|
Line 52: | Line 100: |
== Commmands == Run the following on startup {{{#!highlight bash # do not kill other node crm configure property stonith-enabled=false # disable quorum due to two nodes only crm configure property no-quorum-policy=ignore # configure shared IP crm configure primitive haproxySharedIP ocf:heartbeat:IPaddr2 params ip=192.168.1.47 cidr_netmask=24 op monitor interval=5s # create heartbeat for haproxy crm configure primitive haproxyLoadBalance ocf:heartbeat:haproxy params conffile=/etc/haproxy/haproxy.cfg op monitor interval=10s # make sure the same server has both IP and service #crm configure group haproxyIPs haproxySharedIP meta ordered=false crm configure group haproxy haproxySharedIP haproxyLoadBalance # relation between IP and haproxy servers crm configure colocation haproxyWithIPs INFINITY: haproxyLoadBalance haproxySharedIP # IP should be up before haproxy starts crm configure order haproxyAfterIPs mandatory: haproxySharedIP haproxyLoadBalance #wget http://github.com/russki/cluster-agents/raw/master/haproxy #echo "net.ipv4.ip_nonlocal_bind = 1" >> /etc/sysctl.conf }}} |
Incomplete, do not use!
Corosync and HA-proxy
We will use corosync to create a virtual IP-address which is shared by two systems. One of the systems has the virtual IP-address. If the system goes down, the other system will take over the virtual IP-address. HA-proxy will be running on each of the hosts relaying incoming HTTP-requests to two webservers.
- 192.168.1.47 www (virtual IP-address)
- 192.168.1.48 haproxy01
- 192.168.1.49 haproxy02
Software
apt-get install corosync haproxy crmsh
Configuration
Before binding to the DNS name www make sure the DNS server knows that name. There is no physical or virtual network interfaces, so the DNS updates has to be done manually.
Corosync
Encryption
Edit /etc/corosync/corosync.conf and make the following changes.
totem { crypto_cipher: aes256 crypto_hash: sha512 }
Certificates
Generate the certificates. Note that this requires entropy, so use your system and the entropy will be generated. Speed this up by running dd if=/dev/vda of=/dev/null in another terminal.
corosync-keygen
Network
Add the local network and a multicast address to /etc/corosync/corosync.conf in the interface section.
interface { bindnetaddr: 192.168.1.0 mcastaddr: 239.192.1.1 }
Restart corosync to load the new configuration.
service corosync restart
Nodes
THIS WORKS Do not kill the other node.
crm configure property stonith-enabled=false
THIS HAS TO BE TESTED # disable quorum due to two nodes only crm configure property no-quorum-policy=ignore # configure shared IP crm configure primitive haproxySharedIP ocf:heartbeat:IPaddr2 params ip=192.168.1.47 cidr_netmask=24 op monitor interval=5s # create heartbeat for haproxy crm configure primitive haproxyLoadBalance ocf:heartbeat:haproxy params conffile=/etc/haproxy/haproxy.cfg op monitor interval=10s
# make sure the same server has both IP and service #crm configure group haproxyIPs haproxySharedIP meta ordered=false crm configure group haproxy haproxySharedIP haproxyLoadBalance # relation between IP and haproxy servers crm configure colocation haproxyWithIPs INFINITY: haproxyLoadBalance haproxySharedIP # IP should be up before haproxy starts crm configure order haproxyAfterIPs mandatory: haproxySharedIP haproxyLoadBalance #wget http://github.com/russki/cluster-agents/raw/master/haproxy #echo "net.ipv4.ip_nonlocal_bind = 1" >> /etc/sysctl.conf
}}}
HA-proxy
Add the following to /etc/haproxy/haproxy.cfg
listen webfarm bind www:80 mode http balance roundrobin cookie LBN insert indirect nocache option httpclose option forwardfor server haproxy01 www01:80 cookie node1 check server haproxy02 www02:80 cookie node2 check
Restart HA-proxy
service haproxy restart